Integrated Plumbing System · Made in the UK

IPS Duct Panel Configurator

Build a pre-plumbed duct panel run — set the run length, assign WCs, urinals and basins to each bay, and the manufacturing elevation updates as you work.

2000 × 2400 mm · 2 WC · duct 300 mm · gaps T100/B100/L100/R100/100 btwn · wall/wall ends White 0085 Flashgap Charcoal 0077 Removable (lift-off) access SGL (Solid Grade Laminate) 13mm Wall / Wall ends

Bay widths are nominal face dimensions. Each bay is one full-width panel column; set horizontal splits to stack panels, with the top panel taking the remaining height. Flashgaps frame the run on all four sides plus the feature gap between bays. Joint positions are indicative until works drawings.

Run & Height

Sanitaryware

Finish

Panel run length

2000 mm

Remaining: 0 mm

Panel height

Full height Half height

Full height ducts run floor to ceiling. Half height ducts finish at 1200 mm with a boxed shelf top.

Height

2400 mm

Horizontal panel split

Top panel 2300 mm (remaining)

Panels stack with the top panel taking the remaining height. Set the height of each lower panel, bottom-up.

Flashgaps

Top

100 mm

Min 50 mm — clearance to lift the top panel off.

Base

100 mm

Plinth reveal along the foot of the run.

Left

10 mm

Vertical reveal between the left end and the first panel.

Right

10 mm

Vertical reveal between the right end and the last panel.

Between

200 mm

Feature gap between panels — aligns with cubicle/urinal divisions. Tip: click any gap in the drawing to set its width individually.

End conditions Left end

Wall Return

Right end

Wall Return

Wall = the panel butts to the wall. Return = the panel returns around the corner to the wall. Depth of the returning panel at any return end.

Fixture run

Widths fill the run equally; edit any to override.

Add bay

Bespoke washrooms

Need something more bespoke?

The configurator covers our standard options — we manufacture far more. Tell us what you need and we'll tailor a solution.

Get in touch